When maintenance catches a problem or an unexpected issue arises, we diagnose and repair same-day when possible. Maintenance members get priority repair scheduling.
Furnace Maintenance in Fort Worth, TX
A well-maintained furnace runs safely, efficiently, and reliably through every Texas winter.
- Safety Testing & Inspection
- Combustion Analysis
- Annual Tune-Up Plans
- Priority Repair Service
Why Choose Hobbs
Why Fort Worth Homeowners Choose Hobbs for Furnace Maintenance
Your furnace works hard during the heating season, cycling on and off hundreds of times in response to temperature swings — each startup stresses components and accumulates carbon buildup. A furnace that never receives maintenance gradually loses efficiency, develops problems silently, and often fails catastrophically when you need it most (the coldest night of the year). That’s why Hobbs Heating and Air recommends annual fall maintenance before the heating season arrives. We perform comprehensive inspections, test safety controls, clean burners and coils, check gas pressure and combustion, and replace filters — catching small problems before they become expensive failures.
Get a Free Estimate
Ready to Protect Your Furnace?
A furnace maintenance visit begins with a complete system inspection. We’ll test ignition, measure gas pressure, check combustion safety, inspect the heat exchanger, test electrical components, measure airflow, and review your system’s performance data. We’ll explain what we found, recommend any needed repairs, and answer all your questions about keeping the system running strong through winter.
Get Your FREE Estimate
Have a Heating Emergency?
Call us any time — we’re available 24/7 for emergency heating repairs when your furnace stops working.
817-822-9180
Our Maintenance Process
How Our Furnace Maintenance Service Works
Our maintenance process is comprehensive and methodical. We arrive with full diagnostic equipment and perform every check to ensure nothing is missed.
We start by listening to you describe how the furnace is performing: Is it reaching desired temperature? Any unusual sounds? How many times per day does it cycle? We review service history notes from previous visits and the furnace’s age. We discuss any concerns or changes you’ve noticed. This context helps us focus on potential problem areas.
We test the thermostat to confirm it’s calling for heat correctly and reading temperature accurately. We check the thermostat battery (if applicable) and verify it’s communicating with the furnace. We inspect the electrical connections at the furnace, test the transformer voltage, and confirm power is reaching all components. Loose or corroded electrical connections often cause intermittent problems.
We connect a manometer and measure gas pressure at the furnace inlet — should be 3–4 inches of water column for most furnaces. We test the gas valve for leaks (using soapy water to check connections). We verify the furnace has adequate combustion air (oxygen) to burn gas safely. These measurements confirm the gas side is operating safely and to specification.
We inspect the burner assembly for carbon buildup and clean it if needed. We measure flue gas temperature and calculate combustion efficiency — a well-tuned furnace converts 85–90% of fuel to heat. We verify the flame is bright blue (not yellow or orange, which signals incomplete combustion). We document these readings to track efficiency trends year to year.
We visually inspect the heat exchanger (the metal box where combustion heats air) for cracks, rust, or damage — a critical safety check. We test the limit switch to confirm it cycles on/off correctly. We verify the draft (negative pressure in the flue) to ensure exhaust is flowing safely out of your home. All of these are safety-critical components.
Once all tests are complete, we sit down and review our findings with you: “Your gas pressure is perfect, your burner is clean, your heat exchanger is healthy, your blower is strong. Overall system health is excellent.” We provide a written report showing all measurements and what was done. We discuss any issues discovered and schedule your next maintenance visit before you leave.
Customer Reviews
What Azle and North Texas Customers Say About Hobbs Heating & Air
Furnace Repair Financing
Finance Your Furnace Repairs
When maintenance reveals a repair need, you don’t have to pay all at once. Through Wells Fargo, Hobbs Heating & Air offers flexible financing for Fort Worth-area homeowners so you can fix your furnace today instead of waiting through a cold winter.
Financing For Every Budget
Flexible Financing Through Wells Fargo
A new HVAC system or Generac generator is a major investment. With financing through Wells Fargo, you don’t have to choose between comfort and your budget. Qualifying is simple, and our team will walk you through every step.
Low Monthly Payments
Spread the cost of a new system over time with payments that fit your household budget — no large upfront expense required.
No Hidden Fees
What you see is what you pay. Your financing terms are laid out clearly from day one, with no surprise charges down the road.
Fast Pre-Qualification
Check your eligibility in minutes with a quick online application. You’ll know where you stand before any work begins.
Flexible Loan Amounts
Whether it’s a single mini-split or a full system replacement with a generator, financing can be scaled to match the scope of your project.
Questions about financing? Call us at 817-822-9180 and we’ll help you find the right option before you commit.
Protect Your Investment
Join Our Maintenance Plan
A furnace runs longest and most efficiently when serviced regularly. Our preventative maintenance plans cover annual tune-ups, priority scheduling, and early warning of small issues — so they never become expensive failures during the next North Texas cold snap.
Peace of Mind, Year-Round
Preventative Care Maintenance Plans
Preventive maintenance is the most cost-effective investment you can make in your HVAC system. Hobbs Heating & Air offers residential and commercial plans designed to extend equipment life, keep efficiency high, and catch developing problems before they turn into expensive emergency repairs.
Extend Equipment Life
Regular tune-ups catch wear-and-tear early and add years to your system — protecting the long-haul investment you made.
Peak Efficiency
Clean coils, calibrated thermostats, and tight connections keep energy bills predictable through hot summers and cold fronts.
Priority Scheduling
Plan members get faster service when a breakdown does happen — no waiting in line behind walk-up calls.
Residential & Commercial
Plans designed for both homes and businesses across Azle, Springtown, Fort Worth, Weatherford, and surrounding North Texas communities.
Questions about our maintenance plans? Call us at 817-822-9180 to discuss enrollment and scheduling options.
Service Areas for Furnace Maintenance
Furnace Maintenance Throughout Fort Worth and North Texas
We provide furnace maintenance and tune-ups throughout the Fort Worth area and surrounding communities:
- Fort Worth, TX Serving all neighborhoods; we maintain furnaces in homes from modest to high-end residences with varied heating systems.
- Aledo, TX Newer subdivisions with modern furnaces; quick response times from our service area.
- Springtown, TX Serving ranches and rural properties; we understand seasonal maintenance needs for varying home sizes and ages.
- Weatherford, TX Historic and modern homes; our technicians are familiar with older furnaces and unique venting challenges in older structures.
- Brock, TX Rural and semi-rural maintenance calls; we schedule strategically to keep travel times reasonable while serving all communities.
Protect Your Furnace
Protect Your Furnace With Professional Maintenance
A small investment in preventive maintenance prevents big, expensive failures. Most Fort Worth homeowners don’t think about their furnace until it stops working on the coldest night of winter. By then, you’re waiting days for an emergency repair, paying premium pricing, and your family is cold.
Hobbs Heating and Air offers professional furnace maintenance that keeps your system tuned, safe, and efficient. We test gas pressure and combustion, clean burners, check safety controls, and measure performance. After one annual tune-up, your furnace runs better, costs less to operate, and lasts years longer than an unmaintained system. Join our maintenance plan and get scheduled fall tune-ups plus priority repair service if something does go wrong. No surprise emergency bills, no uncertainty — just the confidence that your furnace will keep you warm all winter long.
Answering Your Questions
FAQs About Furnace Maintenance
We recommend a tune-up once yearly in fall before heating season starts — ideally September or October. This catches problems before winter arrives and gives us time to order parts if replacement is needed. If your furnace is over 20 years old, consider twice-yearly service (fall and spring) to monitor aging components more closely.
A complete tune-up includes gas pressure testing, combustion analysis, heat exchanger inspection, blower motor check, electrical continuity testing, thermostat verification, ductwork visual inspection, air filter replacement, and a detailed written report. A full visit typically takes 60–90 minutes. You receive a digital report showing all measurements and recommendations.
You can change your air filter every 30–90 days and keep leaves off the outdoor venting. Beyond that, professional maintenance requires special equipment (pressure gauges, combustion analyzer), EPA gas-handling certification, and technical training. Attempting DIY maintenance can cause problems — gas pressure testing mistakes or improper combustion analysis can create safety hazards.
No, but it catches 80% of issues before they fail. Manufacturing defects, random electrical component failure, or unexpected accidents can’t be predicted. But the vast majority of winter heating failures are preventable with professional tune-ups. Most emergency winter failures are triggered by problems that a fall maintenance visit would have caught.
This is a classic maintenance issue. Common causes: clogged air filter reducing airflow, dirty burner reducing combustion efficiency, low gas pressure, thermostat drift, or failing blower motor. A tune-up diagnoses which problem is actually happening. Often it’s something simple like a clogged filter or dirty burner that a quick cleaning fixes.
Only if it’s dirty. We always check the filter during maintenance and recommend replacement if it’s clogged. A dirty filter hurts airflow and makes the furnace work harder. Most homeowners should change their filter every 60–90 days during heating season. We can send you a reminder or include filter replacements in your maintenance plan.
We’ll explain what we found and what the repair costs. You decide whether to fix it now or monitor it. If you’re on a maintenance plan, you get priority repair scheduling and often receive a discount on repair labor. Most maintenance-discovered issues are small (failing ignitor, minor gas leak, worn capacitor) and much cheaper to fix proactively than in an emergency.
Absolutely. If maintenance reveals ductwork leaks or poor airflow, you can add duct sealing to the same appointment. If your furnace is aging and looking like replacement might be needed soon, we can discuss replacement options and timeline. We’re happy to bundle services when they make sense.
Maintenance is preventive — you call on schedule before anything fails. A repair call is reactive — your system stops working and you need an emergency fix. Maintenance saves money by preventing emergencies; repairs pay for themselves immediately by avoiding the 2–3 day wait and premium pricing of winter emergency calls.
A newer furnace (under 5 years old) may need less frequent attention, but starting maintenance early is smart. We recommend your first tune-up after the first heating season, then annually. Early maintenance establishes baseline performance data so we can spot degradation before failure. New systems also need break-in inspections to verify proper commissioning.
Fall is ideal — before heating season starts. September and October are good months when our schedule is flexible and weather is mild. If you wait until November or December, we’re heavily booked and your appointment might be delayed. Spring maintenance (March or April) is also acceptable to catch summer rest issues.
A single tune-up runs higher per visit than joining a plan. Plans bundle two visits per year plus priority repair scheduling for less than the cost of two individual visits. Most homeowners find plans provide better value and ensure consistent care. We’ll quote both options so you can compare.
No. Federal law (Magnuson-Moss Warranty Act) prevents manufacturers from requiring you use a specific service provider. As long as maintenance is performed by a licensed, EPA-certified technician — which we are — your warranty stays intact. We document every visit so you have proof of regular maintenance if a warranty claim arises.
Change your filter regularly (every 60–90 days during heating season). Keep the outdoor venting clear of debris and snow. Listen for unusual sounds (grinding, squealing, banging) and call us immediately if you hear them. Monitor your heating bills; a sudden spike can signal a problem developing. Otherwise, let the furnace run — it’s designed to operate reliably between tune-ups.
